TSVA-EOL is a system for evaluation and diagnostics of the assembly of multi-axial meshed rotating bodies such as transmissions, axles, and transfers, etc. For evaluation and diagnostics of assembly, operability, and safety, noise (vibration or noise signals) caused by the system is measured, and an algorithm is used to isolate the signal from each axis based on the number of teeth.
Hardware
Product Configuration
-
Axles
-
Manual Transmission
-
Auto Transmission
Software
Item | Specification | |
---|---|---|
Number of Channel | 3 ch Analog Inputs / 1 ch RPM Input | |
Resolution | 24-bit | |
Maximum Sampling Rate | 102.4 kHz | |
Input Range | ±10 V | |
Input Shaft Speed Range | 1,000 ~ 4,000 RPM | |
Pulse Num / Revolution | 1 ~ 128 P/R | |
Sensor Module | Mass | Max. 50g |
Stroke | Nominal 30 mm | |
Case Tap | M30 x 3.5 |
Item | Specification | |
---|---|---|
Number of Channel | 3 ch Analog Inputs / 1 ch RPM Input | |
Resolution | 24-bit | |
Maximum Sampling Rate | 102.4 kHz | |
Input Range | ±10 V | |
Input Shaft Speed Range | 1,000 ~ 4,000 RPM | |
Pulse Num / Revolution | 1 ~ 128 P/R | |
Sensor Module | Mass | Max. 50g |
Stroke | Nominal 30 mm | |
Case Tap | M30 x 3.5 |
Item | Specification |
---|---|
Sync Series |
|
Synchronous Averaging (Max. 5 axes) | |
Full Automatic Measurement System | |
Test Methods - Crest Factor/rms/Peak/Curve | |
Learning Process | |
Sync Viewer | Chart View (Marker, Copy, Print) |
Test Report Print | |
Database Management (Access VBA) |
Parameter Setup Database |
Result Database | |
Production Database |
Item | Specification |
---|---|
Sync Series |
|
Synchronous Averaging (Max. 5 axes) | |
Full Automatic Measurement System | |
Test Methods - Crest Factor/rms/Peak/Curve | |
Learning Process | |
Sync Viewer | Chart View (Marker, Copy, Print) |
Test Report Print | |
Database Management (Access VBA) |
Parameter Setup Database |
Result Database | |
Production Database |